characteristic

This product has the characteristics of no odor, low gas generation, non stick mold, and no need for exhaust and purification system. It is suitable for the core making or molding production of aluminum alloy castings.

Specification/Model

resin

additive

Usage

1. Mix the raw sand with additives and binders to make molding sand.

2. Blow the molding sand into a pre heated mold, blow hot air, solidify the sand mold, and open the mold to take the core/mold.

Packaging and storage

1. Resin should be antifreeze and stored at a temperature greater than 5C; Additives are prone to moisture absorption and need to be kept away from moisture during storage.

2. Adhesive iron bucket packaging, additive double-layer soft packaging.

matters needing attention

Please wear protective equipment when using